Immigrate to Canada as a Panel Beater In 2024

If you’re searching to Immigrate to Canada as a Panel Beater In 2024 as a Panel Beater you’re in luck! Panel beaters are in demand properthroughout Canada and you might also be in a position to impenetrable a Canadian Permanent Residency Visa both with or except a job offer. how to Immigrate to Canada, Immigrate to Canada 2024, Immigrate to Canada 2023/2024,

Panel beaters additionallyknown as smash repairers, are humans who restoreautomobiles and differentmotors after a collision. A panel beater can return your vehicle to its pre-accident condition.
The panel beating mannerincludes removing, repairing, and changingbroken panels, as nicely as spray painting, chassis alignment, and refitting physique hardware.

No doubt you will have examineon-line that having a job provide to pass to Canada is a prerequisite to having access to the Express Entry techniquehowever as a panel beater, you additionally have differentselections to impenetrable your Canada Visa from the start.

For starters, Panel beaters are eligible to observe to immigrate to Canada underneath the Canadian Government’s Immigration software due to the demand for Panel beaters in Canada being so outstanding they have covered the occupation on the focused occupations list, acknowledged as the NOC listing (National Occupation Code List).

There is a massiveamount of work that goes into repairing a car after an accident. Cars are extracomplicated and elevateextratechnological know-how than ever before, so repairing them requires specialisteducation and processes.

The dutiesworried in panel beating include:

  • Removing, repairing, and changingbroken panels
  • Repairing dents and scratches with distinctiveness fillers
  • Filing and sanding the bodywork to make sure a clean finish
  • Replacing brokencomponents with truecomponents from the car manufacturer
  • Installing physique hardware such as door locks and sensors
  • realigning the chassis and physique frame
  • Repainting the car and matching the unique color.

Panel beaters are specialists in a hugevary of dutieswanted to return a automobile to its pre-crash condition.

The code for Panel beaters on the NOC is 7322

This is notableinformation for certified Panel beaters the world over hoping to stay and work in Canada.

Express Entry for Canada is no longer a visa classification at all, it is surely the approach (or database) that Canadian Immigration makes use of to pick out the proper candidates for a everlasting residency visa and in that case, as a panel beater searching to immigrate to Canada we’ll be searching at the Federal Skilled Trades visa and Provincial Nominee program.

Panel beaters from all over the world are eligible to make an Express Entry for Panel beater Canada Residency providing they have the right skills, experience, and qualifications in their home country.

Panel beaters looking to move to Canada to work under this NOC category 7322, might be employed under work titles including:

  • antique car body restorer
  • antique vehicle body restorer
  • apprentice painter – motor vehicle repair
  • auto glass installer
  • autobody mechanic
  • autobody repairer
  • autobody technician
  • autobody technician – collision
  • autobody technician – refinishing
  • autobody worker
  • automobile body repairman/woman
  • automobile damage repair estimator
  • automobile polisher-sander – motor vehicle repair
  • automotive body mechanic
  • automotive body painter
  • automotive body repairer
  • automotive body repairer-painter
  • automotive body technician
  • automotive glass technician
  • automotive painter – motor vehicle repair
  • automotive painter apprentice
  • automotive painting and refinishing technician
  • automotive repair shop estimator
  • body and fender repairer – automobile
  • body and fender repairman/woman – automobile
  • collision repair technician
  • dent remover and repairer – automobile
  • Dingman/woman – autobody
  • journeyman/woman motor vehicle body repairer
  • metal finish and touch-up repairer – motor vehicle manufacturing
  • metal finisher – motor vehicle manufacturing
  • metal repairer – motor vehicle manufacturing
  • metal upgrader – motor vehicle manufacturing
  • motor repair vehicle painter apprentice
  • motor vehicle apprentice painter
  • motor vehicle body finisher
  • motor vehicle body repairer
  • motor vehicle body repairer – collision
  • motor vehicle body repairer – metal and paint
  • motor vehicle body repairer – refinishing
  • motor vehicle body repairer apprentice
  • motor vehicle body repair-painter
  • motor vehicle body technician
  • motor vehicle body technician – truck
  • motor vehicle painter – motor vehicle repair
  • painter – motor vehicle repair
  • used car renovator

All these roles held by panel beater are eligible to apply under this specific NOC category of 7322

Tasks for those looking to Immigrate to Canada as a Panel Beater

In general panel beater moving to Canada will be able to demonstrate knowledge or experience of the following:

Review damage report and estimates of repair cost and plan work to be performed

Repair and replace front end components, body components, doors and frame and underbody components

Hammer out dents, buckles and other defects using blocks and hammers

Operate soldering equipment or use plastic filler to fill holes, dents and seams

Remove damaged fenders, panels and grills using wrenches and cutting torch and bolt or weld replacement parts into place

Straighten bent frames using frame and underbody pulling and anchoring equipment

File, grind and sand repaired body surfaces using hand and power tools

Mask and tape auto body surfaces in preparation for painting

Mix paint, blend and match colours

Apply primers and repaint surfaces using brush or spray guns

Repair and replace glass components such as windshields, windows and sunroofs

Repair or replace interior components, such as seat frame assembly, carpets and floorboard insulation

Inspect repaired vehicles and test drive vehicles for proper handling.

Emigrate Canada has a dedicated Panel beater Canada desk that only represents qualified panel beaters immigrate to Canada. They understand your profession and can talk your language when it comes to explaining your immigration pathway and the route to securing a Canada Visa for you (and your family).

In the U, for example,e we’ll be looking for NVQ Level III

From South Africa, you will be expected to hold your Red Seal

We’re happy to represent panel-beater clients from all over the World so regardless of your country of qualification feel free to contact us today for a full breakdown of your Canadian Immigration chances.

Reasons To Do Panel Beater Apprenticeship

Choosing a career path takes great consideration. Pursuing a panel-beating apprenticeship with Sheen Panel Service will arm you with best-in-class training and genuine career opportunities and progression. Apply for a panel beating or spray painter apprenticeship today.


With no two days the same, a panel beating apprenticeship will see apprentices working across varied tasks that touch every service point of the business.

Challenge yourself daily with a panel beating apprenticeship at Sheen Panel Service, and master the art of the many diverse tasks required of a skilled panel beater. This is what a panel beating apprenticeship at Sheen Panel Service looks like:

  • Removing, repairing, and replacing damaged panels on any vehicle
  • Making or forming panels to replaced damaged ones
  • Repair dents on a damaged vehicle using fillers
  • Filing, grinding & sanding the body of a vehicle to restore a smooth vehicle surface
  • Re-fit body hardware, such as door locks
  • Realign chassis & body frames
  • Removing and replacing a vehicle’s auto-electric components if damaged


At Sheen Panel Service, offering a panel beater salary that is above award renumeration is a way of recognising and retaining talent. A panel beater apprenticeship is the first step in your career, and ensuring that apprentices are set up for success is how the group have continued to produce the best industry professionals.

Sheen Panel Service’s panel beater apprenticeship model is also set up so that apprentices are paid on a weekly basis to align with lifestyle needs and set them up for success.


A skilled professional is nothing without training, and Sheen Panel Service have designed a panel beater apprenticeship that consists of in-depth training with the most recent technology and best practice available.


As automotive production evolves, so does the need for best in class equipment to complete a panel beater apprenticeship.

Apprentices will learn the craft by using state of the art equipment, positioning their development on a trajectory inline with modern advances and technology. Apprentices have access to the latest equipment, like Car-O-Liner measuring benches, spray booths, and computer scanners that ensure all electronics and sensors are reset and working correctly.


It’s not enough to be challenged in a panel beater apprenticeship, one must also enjoy the environment and culture.

We’re just a tight knit sort of family, we do have a muck around but at the end of the week we get our work done”, Paul, Head Spray Painter at Sheen Panel Service.

Providing a workplace where apprentices can be engaged and feel supported by the greater team is integral to the success of the company and its panel beater apprenticeship reputation. Sheen Panel Service values initiative and hard work, with the support of its full network of locations behind you.


As the proud recipients of prestigious industry awards, securing a panel beater apprenticeship with Sheen Panel Service will set apprentices up for success in their roles covering areas of technical, operational and communication.

Work with some of the most talented in the panel beating and spray painting profession who are at the forefront of industry changes and technology.


Sheen Panel Service boast many locations within Victoria, with the operation continuing to expand. A panel beater apprenticeship leads to opportunities within the group and beyond, with the confidence of knowing that your certification and work experience are highly regarded in the market.

Many smash repair jobs can lead to management positions, and owning your own franchise. Jump start your career and position yourself as an emerging professional with a panel beater apprenticeship with Sheen Panel Service.


Securing a panel beater apprenticeship with Sheen Panel Service will not only afford you an above award panel beating salary, but set you up for a fruitful career in the panel beating trade.

Being trained by seasoned professionals will give you insight into future prospects and how to keep ahead of the trade so that opportunities are available. Working in real time on varied tasks within Sheen Panel Service will give your apprenticeship great scope.


Sheen Panel Service pride themselves on the working conditions provided to those pursuing a panel beating apprenticeship.

The Sheen Panel Service are always investing in new technology, new tools, new equipment, and also the training to use these tools correctly and in the safest manner,” Matt Johnston, Sheen Panel ServiceTradesmen Panel Beater.

Consistent training and a desirable panel beater salary makes a panel beater apprenticeship at Sheen Panel Service the only consideration.


Secure an up to date certifications with training from I-CAR as well as training to use leading technology, such as the Car-o-liner measuring benches.

Continual training and a network of support from Sheen Panel Service’s locations will take your career to great heights and an above-award panel-beater salary, and set you on a track to management and franchise opportunities.


It can be hard to keep a cool head in the aftermath of a smash, but you need to think practically and choose the right panel beater to repair your vehicle.

Sounds easier said than done, right? Not necessarily. If you want to avoid being ripped off or having a second-rate job done on your car, then you just need to ask the right questions.


Cheap panel beaters seem like a great deal, but the poor workmanship and non-genuine parts can cost you more down the road.

If you don’t fancy having to pay another panel beater to repair the repairs and reverse the shoddy work completed by cheap panel beaters, make sure you choose a panel beater with a good reputation and a lot of experience in the smash repair business.

The number one thing that cheap panel beaters are known for is using non-genuine aftermarket replacement parts that do not meet the specifications set by the car manufacturer.

These aren’t subject to the same quality standards as genuine parts and are therefore cheaper upfront. However, they can end up costing you significantly more in the long run as they may wear more quickly, break more easily, or simply not function as required.

Genuine parts are more expensive to buy upfront because they come with a lifetime guarantee from the vehicle’s manufacturer and are made to precise finish and fit specifications.

They are the only thing a reputable panel beater will use. Using anything else may risk the safety and reliability of your vehicle, and only panel beaters who cut corners will do that.


Ask your panel beater to explain how they determine the process of repairing your vehicle. This is a great way to discreetly check their standards and if they have set procedures in place.

While set procedures may sound like a good thing, what you should be looking for is a set process that involves examining your car from top to tail and assessing everything about it that needs to be repaired.

A panel beater’s approach to smash repairs on your vehicle should be completely personalized. If you’ve driven both a sedan and an SUV during your lifetime, you’ll understand why: no two cars are exactly alike. Settle for nothing less than a tailored quote for your smash repairs.

At Sheen Panel Service, we choose our method of repair based on the manufacturers approved repair method. Anything outside this scope doesn’t fall into the spec of the manufacturer.

When we put together panel beater quotes for our customers, there are multiple factors we take into account, such as the extent of the damage and the age of your vehicle.

Our Upload Your Smash page enables us to come back to you with a quote within the hour, but we also carefully examine your car in our panel shop, as the many factors that determine how a repair should be undertaken can’t always be depicted in photographs.

There may very well be structural damage hidden behind the cosmetic detrition to your car, and we can talk you through all our methods of repair.


You wouldn’t want just anyone to work on your vehicle – reputation matters. Ask your panel beater about how much experience they have in the smash repairs industry and whether they can make dealing with your insurer as painless as possible by assisting you through the claims process.

You won’t need to be concerned about shoddy smash repair techniques if the panel beater you choose has been in the business for a long time.

Ask them if they have:

  • Trade school qualifications, e.g., they are trained and certified to work on your vehicle.
  • Current membership with the Victorian Automobile Chamber of Commerce (VACC). As VACC-affiliated body repairers, they will comply with all VACC equipment standards, repair standards, and disputation procedures.
  • Specialist training from professional auto industry organizations such as I-CAR and BASF.


As VACC-affiliated body repairers, Sheen Panel Service complies with all VACC equipment standards, repair standards, and disputation procedures. VACC members must offer a minimum three-year warranty on all smash repair services, and we have been a proud and active member of the VACC for over 40 years.


However, Sheen Panel Service goes one step further by offering a lifetime guarantee on all our repairs – providing our customers with additional peace of mind in choosing us as their panel beater.

Most of our competitors will only offer a limited guarantee on smash repairs. Our confidence in our work is one of the areas in which we stand out from the crowd.

Our lifetime guarantee means that if a fault is detected in our work, even if it’s several years down the track, then we’ll repair the issue at no cost to you. Check out our Before & After Gallery for proof of our top-quality repairs.

Asking about a lifetime guarantee is a surefire way to find a panel beater who will work with you every step of the way. Don’t accept second best when it comes to smash repairs – get workmanship that is guaranteed to restore the condition and value of your vehicle.


This might be the first question that springs to mind when searching for a panel beater, but don’t forget to ask the others as well if you want to get the best deal for smash repair services.

Whether you’ve dented your car or had a more serious accident, an alternative form of transportation while it is towed and repaired is crucial.

When consulting a panel beater, ask if:

  • They offer a courtesy replacement vehicle. No one wants a rental car fee on top of smash repair costs.
  • If you can specify where you want the replacement vehicle delivered (home, work, school, gym, etc).
  • Whether their replacement vehicles come in a range of options (small car, family-sized unit, trade ute or service van).
  • If they offer post-service care and conduct a full follow-up to ensure you’re fully satisfied in the weeks following repairs.

At Sheen Panel Service, we’ll get you back on the road straight away with a replacement vehicle that suits your lifestyle. Our fleet features over 400 modern vehicles with options for families and tradies. Plus, when you pick up your repaired vehicle, it will be repaired to pre-crash condition – valeted, detailed, and with a complimentary gift bag.

How to Immigrate to Canada as a Panel beater

The first stage in your Canadian immigration process is to calculate your Canada Immigration points for Express Entry using the Canadian Comprehensive Ranking System.

CRS Points are awarded for (amongst other things)



English ability

French ability

Your partner’s skills

Work experience

As well as providing you with important CRS points these factors also count towards your overall Immigration Points score which must equal or exceed a total of 67

Once you receive an ITA (Invitation to apply) from Canadian Immigration as a result of your Express Entry application you’ll only have 60 days in which to lodge a formal application so under no circumstances should you lodge an Express Entry application ‘claiming’ to have certain points without first having all of your points verified through different testing, education equivalence certificates and skilled trades assessments.

Once you are invited to apply for your Canada Visa you cannot go back and have these things verified retrospectively, they must be done before you claim any points for them and given that your express entry profile is only valid for one year it makes sense to present the best possible case right from the start.

Here are the 5 steps to Panel Beating

1. Shrinking/Stretching

2. Planishing

3. Welding

4. Filling

5. Sanding


This involves applying heat to the damaged area of the panel whilst using a special hammer to reshape the metal. This technique is used together with Planishing to  restore the panel to original shape and contours.


A planishing hammer is used to finely shape and smooth the panel surface. This metalworking technique helps push out the damaged metal where the metal is pushed against a shaping tool, known as a dolly or stake.


Welding may be use to join pieces of metal together by melting the work pieces together, once cooled it becomes a strong joint ensuring a strong vehicle structure. There are several ways to weld, such as by a gas flame or an electric arc but is dependent on the type of materials to be joined.


This involves adding putty filler to fill in some small holes in the surface so the original shape and contours can be achieved. It needs to be applied carefully our onto the area as fast as possible as once it hardens it’s not usable anymore. As the filler hardens, then it’s time to smoothed and shaped by sanding.


Sanding is the procedure used to finely shape and smooth area ready for spray painting. Depending on the stage of work, a different texture can be achieved by changing the coarseness of the sanding pad.

Skills Assessment to Emigrate to Canada as a Panel Beater

The process of getting your panel beating skills, experience and qualifications verified is called Skills Assessment and it serves two purposes.

Canada Panel beater Skills Assessment purpose one: With a positive skills assessment you’ll be able to claim the requisite points on both the Express Entry CRS and eventual Federal Skilled Trades application.

Canada Panel beater Skills Assessment purpose two: Your positive skills assessment will also double as your Red Seal qualification so having your panel beating skills assessed means that you’ll be qualified to work as a panel beater in Canada from day one.

As part of your immigration process, your dedicated Panel beaters Canada account manager will arrange for your Red Seal equivalency process so there’s no need to worry about how to move to Canada; we’ll have you covered from the moment you get the ball rolling.

Can I emigrate to Canada as a Panel Beater without a job offer?

The answer is a resounding yes, providing you have a reasonable total CRS score on your Express Entry application and can meet the 67 immigration point threshold for your Canada Federal Skilled Trades Visa.

Technically there is no minimum CRS score required to submit a Panel beater Canada Express Entry profile.

Of course, securing a job offer (documented in the right way for immigration purposes i.e. LMT) will give you an instant CRS boost of 600 points so it makes sense to start this process as soon as is practical.

Panel beater Jobs in Canada

Occupations on the Canada NOC list can be classed as being ‘in demand’ and the panel beaters code 7322 has been firmly established on the list for many years with lots of opportunities right across the country.

As a qualified new and highly skilled Permanent resident of Canada, you may work full-time from day one, either as a direct employee, contractor, or in a self-employed capacity. Panel beater jobs in Canada are often better paid than in the UK, Europe, and Asia and Canadian employment law respects the work-life balance.

Canada as a Motor Collision industry accreditation Program.  Any Panel Beater looking to start their own shop once they have emigrated to Canada should look into the accreditation required.

Emigrate Canada are the Panel beater Canada Visa specialists with a dedicated Skilled Trades desk ideally placed to take care of not just your immigration paperwork, but also to get you registered to work from day one.

Tools Used by Panel Beaters

1: Panel Beating Hammers

A variety are available.Flat faced for crowned panels, crowned-faced for flat panels. These shapes limit the surface contact and can come with round or square faces, heavy or light weights. Also, cross pein and pick ends are useful. My hammers are all crowned, which works for me.

2: Cross-Pein Hammers

The cross pein hammers allow for a concentrated blow with linear impact. This is used for many jobs, in particular when dressing door skins at critical points such as swage lines. A crowned heavy round-faced bumping hammer with cross-pein end is possibly the most useful tool you will buy.

3: Pick Hammers

For an expert, the pick hammer is the most effective tool, but for the uninitiated it is a nightmare. This hammer can be used to pick up a dent from inside, using light, careful blows. The dimples are then planished away.

4: Shrinking Hammers

There are many wonder hammers on the market, but some are of only limited use. The spiral-faced hammer here is quite good. It is effective when removing scrapes on doors. Use in conjunction with a flat dolly.

5: Dollies

These provide the counter to a hammer, or can be used to dress directly. Striking on the dolly will raise the metal by stretching, while striking off will cause it to lift. Dollies come in many forms and you can never have too many.

6: Spoons

A spoon can be used to pry, drift and slap, or as a dolly. Generally cast in metal and chrome-plated, these are very handy tools to have around. The universal spoon also has a hooked end. When using as a drift, the spoon is struck with a mallet or club hammer.

7: Heavy Roughing Hammers

Club hammers, engineer’s hammers and heavy mallets. Roughing out is the term given to the stage in a repair before the final shaping and planishing. A range of hide copper and rubber mallets is a good idea, along with at least a couple of heavy steel hammers.

8: Dead Blow Hammer

This clever polyurethane hammer deserves a mention. Unlike conventional rubber hammers this has a hollow cavity filled with shot. In use, as the hammer strikes, its natural tendency to bounce is countered by the shot, which instead reinforces the blow. Great for bodywork.

9: Slappers/Spring Hammers

Any long striking device might be regarded as a slapper, be it made of wood, steel, or as in this case, have a rubber face. It is often useful to inflict a defuse blow on the work piece. Highs can be shrunk so as not to leave a flat or hollow.

10: Bumping File

This was traditionally an old file, which had been lopped and shaped to work as a slapper with grip. The knurled file face will counter the natural tendency of the metal to stretch. The bumping-file or Shrinking Slapper is also essential in the process of metal finishing.

11: Body File

Though not a beating tool, the flexible body file is used in conjunction with the bumping-file in the metal-finishing process. This adjustable file is an essential element in any panel beater’s tool kit.

12: Proprietary Panel Beating Kits

Panel Beating kits are available from companies such as Frost Auto. Higher-priced tools often feel better in the hand. If you are only going to renovate one car, go for the budget set. Should you be more serious, spend a bit more.

Leave a Comment

Adblock Detected

Please consider supporting us by disabling your ad blocker

Refresh Page